Wednesday, March 30, 2011

A Screw Driver can be a Very Enjoyable Tool

Like most people I have a occasion to buy new tools for the shop and when I obtain a tool with which I am particularly impressed I like to share my joy of owning this tool or in this case a set of tools. When I have a need to fulfill I usually like to purchase tools from another independent tool maker such as myself. Bear in mind that when I write about other’s tools in this blog these are tools that I have sought out and purchased. I am not encouraged to promote other's tools and only do so of my own free will and most importantly if I think the tool is particularly worthy.

I pursue making fine tools on a daily basis and I know most of the people in the hand tool woodworking world that also produce products of a similar nature and quality so I’m not easily impressed. I now own a set of screw drivers with which I am very impressed.

I use screw drivers an awful lot. While sizing the height of the lever cap pivot pins for one of my planes I remove and install these slotted pivot pins several times and in the process of tuning the lever cap to the back of the plane iron I may remove and install the lever cap pivot pins several more times during this process, not to mention the many other occasions during the day that require the use of a screwdriver.

During the years that I made furniture I often wished for a good set of wooden handled screw drivers. I searched for this elusive tool and the best I could find was a set that I purchased from Garrett Wade. They had square wooden handles with a sprayed lacquer finish and even though they were better than the plastic variety they still left something to be desired. They were advertised as being made in Germany. They were not exactly the Mercedes of screwdrivers.

I continued to search and once I entered into making tools I often encouraged other tool makers that made small tools with turned handles to develop and offer a good set of screw drivers. Most of them looked at me like I had two heads and typically walked off mumbling something about how I had gone completely round the bend.

Thankfully waiting round the bend was Gary Benson, Dave Lindeman and Chuck Pyne of Elkhead Tools. They obviously also thought the world needed a better set of screw drivers because they have produced a set of tools that exceeded my wildest dream of what a set of screw drivers should be.

Cheap, poorly designed screw drivers are hard on your hands and most of them don’t fit the slots of common screw sizes well at all. When they slip they mark your work and this just creates more work for a plane maker. The Elkhead Tools drivers are an absolute pleasure and quite frankly every time I hold one in my hand I marvel at how they nestle in my palm and the feel of the cocobolo handles is just so enjoyable that I believe I unconsciously smile every time I pick one up.

I’ve waited a long time for a good set of screw drivers and these guys have obviously put a lot of effort into developing these tools. These tools consist of hand turned cocobolo handles, German tool steel shank and tip with brass ferrules integral of the handle insert that gives these screw drivers such a solid and well put together appearance and feel. The tips fit the slots of common size screws quite well and don’t ding and deform the edges of the screw head slots.

If you’re getting the idea that I like these tools you’d be correct. Let me say this however. These screw drivers are most likely a bit pricier, well actually a lot pricier than any set of screw drivers you’ve ever purchased but don’t worry you’ll be getting your money’s worth and you’ll know it every time you pick one up.

If you would like to learn more about these screw drivers and the other offerings by Elkhead Tools you can visit them online at www.elkheadtools.com

Once you've acquired this set of screw drivers you're going to need another set. Go right out to your local big box store and buy a complete set, maybe even two complete sets, of the yellow and black handle screw drivers. They'll probably be less than $10.00 for the whole set and then you'll be ready. Why you may ask. When your neighbor or brother in law comes calling wanting to borrow a screw driver you'll be ready. They most probably need it to open a can of paint and there is a better than even chance they will never return it. It will be well worth the ten or so dollars to keep harmony in the neighborhood and peace in the family.

Ron

7 comments:

  1. I totally agree Ron. I have a set of these that Gary sent me to review. They bring a smile to my face every time I pick them up.

    ReplyDelete
  2. Ron, I do not have a set but you sure have made me rethink my decision. Fred

    ReplyDelete
  3. Yea Ron, I am also agree with your comment. I have a set of TorxScrew Driver, it is very helpful for me. I love this Blog. It is so informative. We are just starting out, and I read this site every day!"


    Tape Measure

    ReplyDelete
  4. This comment has been removed by a blog administrator.

    ReplyDelete
  5. Once you've acquired this set of screw drivers you're going to need another set. Go right out to your local big box store and buy a complete set, maybe even two complete sets, of the yellow and black handle screw drivers. They'll probably be less than $10.00 for the whole set and then you'll be ready.
    Screw Driver Teddy

    ReplyDelete
  6. Thanks for sharing such a nice post about screwdrivers. Recently I heard about one of the best companies of fasteners whose name is Mig Enterprises. It provides the best quality of fasteners at an economical price. if you are interested to buy products from that company, you can go to this site Fasteners Suppliers Sydney.

    ReplyDelete
  7. This comment has been removed by the author.

    ReplyDelete